PRODUCTS


SERVICES




SOLUTIONS




CONTACTS
COMPANY



CHOOSE YOUR COUNTRY
HOME APPLIANCE AND CARTON CLAMPS




CANADA

Home Appliance and Carton Clamps

Models LS-V Force Balance (Sideshifting)

Models LS-V Force Balance (Sideshifting)

The Bolzoni Auramo Force Balance System allows perfect distribution of the clamping force over the pads’ surface, this leads to a correct clamping force distribution.
Both vertical and horizontal alignment are adjusted through elastic elements.
Recommended for the home appliance handling.

Range: 2,000 - 4,400 Lbs.

Plus:

  • Large surface aluminium pads.
  • Single oscillating pad.
  • Special high-friction vulcanized rubber lining for increased positive grip allowing safe and damage-free handling.
  • Thin arm profile and new elbow support design allow easy knifing between loads.
  • Interchangeable left-right pads for more even rubber wear.
Models LS-V Force Balance (Sideshifting)
Print
Models LS-V Force Balance (Sideshifting)
Models LS-V Force Balance (Sideshifting)
MODEL

Capacity

Load
Center
Opening
Range
Opening
Range
Arm
dimensions
Arm
dimensions
Arm
dimensions
Frame
width
Min
carriage
width
Height

Weight

Horizontal
load center
Vertical
load center
Effective
Thickness
Ground
clearance
Mounting
Class
QBPB minB maxALEIFLDWHCGVCGLLP
Lbs.Lbs.
LS 12 V1A-FB2,6001524.8031496062992178.3464566929133948302.240.227.248.31234.840132304312.417.85.81.2II
LS 12 V2A-FB2,6001522.0472440944881979.9212598425196948302.244.1"27.248.31256.89084895259112.417.85.81.2II
LS 12 V3A-FB2,6002023.2283464566929176.771653543307148402.240.2327.248.31323.04299889746413.1155.81.2II
LS 10 V4A-FB25002122.4409448818897776.771653543307148422.240.227.248.31340.68357221609716.914.95.51.2II
LS 10 V5A-FB25002322.4409448818897776.771653543307148462.240.227.248.31470.78280044101418155.51.2II
LS 09 V6A-FB25002422.4409448818897776.771653543307148482.240.227.248.31543.55016538037519.4155.51.2II
LS 09 V7A-FB2,0002622.0472440944881976.3779527559055148522.240.227.248.31609.70231532524820.9155.51.2II
LS 16 V3A-FB3,5002022.0472440944881978.3464566929133948402.242.527.248.31367.14443219404613.1155.81.2II/III
LS 16 V4A-FB3,5002122.0472440944881978.3464566929133948422.242.527.248.31455.34729878721113.9155.81.2II/III
LS 16 V5A-FB3,5002322.0472440944881978.3464566929133948462.242.527.248.31521.49944873208418.2155.81.2II/III
LS 16 V6A-FB3,5002422.0472440944881978.3464566929133948482.242.527.248.31576.62624035281119155.81.2II/III
LS 14 V7A-FB3,1002621.6535433070866177.9527559055118248522.242.527.248.31598.67695700110220.8155.81.2II/III
LS 14 V8A-FB3,1002721.6535433070866177.9527559055118248542.242.527.248.31642.77839029768521.4155.81.2II/III
LS 16 VJA-FB3,5002022.0472440944881978.3464566929133954402.242.527.254.31433.2965821389216.517.85.81.2II/III
LS 16 VXA-FB3,5002422.0472440944881978.3464566929133954482.242.527.254.31609.70231532524818.417.85.81.2II/III
LS 14 VYA-FB3,1002621.6535433070866177.9527559055118254522.242.527.254.31653.8037486218319.417.85.81.2II/III
LS 20 V6A-FB4.42618.5039370078740277.5590551181102448,0"48,0"2.250,3"27.248,3"2138.91951488423417,7"17.86,4"1.2III

Notes:

  • Two hydraulic functions.
  • E= arm thickness, including rubber.
  • T= arm thickness at the arm base, including rubber, 3.9” for all models.
  • Block valve with 2 pressure relief valve, factory pre-setting.
  • Internal sideshift.
  • Pressure gauge.
  • Flow divider for equal arms movement.
  • Load backrest.
  • Quick disconnect lower hooks.
  • Weld-on arms.
  • Aluminium pads with single oscillation.

Options:

  • Special opening ranges.
  • Other arm dimensions.
  • Removable side load stabilizers.
  • Class III mounting.
  • Four position pressure relief valve.
  • Double oscillating arm pad.
  • Rigid arms, without oscillation.
  • Razorback pads.
  • Replaceable 7” high wear plates at the bottom of each
  • pads (these pads are only 2 ways reversible):
  • - diamond plate replaceable wear strip
  • - rubber covered plates
  • Non-sideshifting - no charge